6/12/24V – 70/65/30 Amps Wheeled Battery Charger 205 Amp Crank Assist at 12 Volts Digital Meter: Amps, Volts, Time, Mode AGM/EFB Specialty Charge Mode Manual Mode with Adjustable Timer (5-180 minutes) Automated Load Test (Maximum & Minimum Voltage, Active Voltage (OCV), Estimated CCA
Vehicle Battery Systems fitted to modern cars require a complex system to control and maintain the best charge and discharge rates which not only ensures the longest in service life but also that systems such as Stop/Start operate correctly. The 12-0200 gives the operator access to all the functions complicated and time-consuming manufacturer scan tools
The Associated ESS6100 is a 100 A high power Smart charger with inverter technology. It allows you to Keep a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its
Features Bus Bar set for parallel charging Batteries in Vehicles Up to 4 Vehicle capacity Insulated fiberglass backboard with 4 pairs DC charging leads, 5 AWG, 20 FT long with 300 Amp insulated safety clamps Ideally Paired with 6066A Intellamatic Smart 60/30A Gang Charger Charge four batteries at 15 Amps per battery Safety Manufactured with
Aircraft Jumper Cable • This jumper cable features a standard 3-pin Polycarbonate female plug (AN2551) • Polarity light warns if clamps are connected incorrectly • Tangle-free Dual Extruded • Model 6141 Tangle-free Dual Extruded 4 AWG Cable length – 15 feet • Model 6141-25 Tangle-free Dual Extruded 4 AWG Cable length – 25 feet •
Automatic Battery/Electrical System Tester w/Cart • Same features as the 6044 • PLUS heavy duty, two-wheel tilt-back cart with 8” wheels and 2 trays • Made in USA of US and Global Components
Positive Battery Cable Clamp Covers • Designed for use with Memory Saver Cables to prevent positive battery clamp from arcing • High Visibility & Corrosive Resistant • Made in USA of US and Global Components
Intellamatic® 12 Volt Charger/Analyzer/ Power Supply 20 Amp power supply mode for extended service procedures or re-flashes
• 12′ – Straight Cord • 5 Amp In line fuse • OBDII Connector with cigarette lighter input and in-line fuse
1000 Amp AC/DC Inductive Amp Clamp • A great tool for accurate measurement of current sources up to 1000 amps • Use with most digital multi-meters • 1mV/Amp output guarantees easy reading on your meter • Ideal for checking starter draw, alternator output or parasitic battery drain testing • Design allows accurate current readings without
110V Parallel Battery Charger with Spanish Language Instruction Panel • 30 Amp Output at 14.9 Volts • Charges 1 to 10, 12 Volt batteries in less than 24 hours in parallel • 16 charge rates offer precise charging • Analog meter shows testing efficiency results • Made in USA of US and Global Components
• Adjustable 12 Volt 60 Amp Charger • Adjustable 70 Amp Reflash Power Mode • 270 Amp Crank Assist
• Adjustable 12 Volt 60 Amp Charger • Adjustable 70 Amp Reflash Power Mode • 270 Amp Crank Assist
6/12 Volt Fast Charger 40/10 Amps charger 200 Amp Crank Assist at 12V “Safe in Any Weather” Operation Made in USA of US and Global Components
Aircraft Power Plug • Aircraft Power Plug is a coaxial Piper type designed to for the aircraft market. • Electrical conductors and connections are designed for maximum efficiency and long life • Cable clamp holds wires firmly in place • Die cast housing • Mates with 11041socket • Brass female contact with spring-grip tension provides
• 12′ –Heavy Duty Straight Cord • 15 Amp Continuous / 20 Amp Peak Memory Saver Cable • Cigarette Lighter Plug Input / Output with in-line fuse
Shown with optional 12-2416 barcode scanner Graphical Hand-Held Tester with Thermal Printer and USB Port Tests 12V Flooded, AGM, Gel Cell, Li-Ion & EFB Batteries from 100 to 2000CCA Graphical/Symbol Based LCD display Tests 12/24V charging and electrical systems Stores last 70 test series with or without power Carrying case, printing software and USB cables
6/8/12 Volt 0-1000 Amp Heavy-Duty Variable Carbon Pile Load Tester • High-volume testing and fleet use • Tests 6/12 Volt batteries • 1000 Amp load; tests batteries up to 2000 cold cranking amps • Built in LCD Digital Voltmeter and LCD Digital Amp Meter • Cools with high RPM fan for continuous battery testing •
Automatic 1.5 Amp 12 Volt Smart Charger/Maintainer/Rejuvenator • Microprocessor controlled automatic charger & maintainer • Internal Overheat Protection • Ultra low power consumption (ECO mode) • Short Circuit or Reverse Polarity Protection • Corrosion-resistant output connectors • Output clips and ring terminals provided quick disconnect • Foldable smart hook to hang or wall mount during
Automatic 1 Amp 6/12 Volt Battery Maintainer/Charger • Automatic Switching Mode Battery Charger & Maintainer • Charge & Maintain – Automatic Charge • Charge & Maintain – Automatic Maintenance – Float Mode • Short Circuit Protection • Output Overload Protection • Reverse Battery/Overload Condition Indication • Internal Overheat Protection • Output clips and ring terminals
60 Amp / 270 Amp Boost Wheel Smart Charger & Power Supply for Standard Automotive, Deep‐Cycle, AGM and Gel Cell batteries, 220VAC
220V 60A/270A Boost Wheel Smart Charger & Power Supply (International) • Charges all 12V standard automotive, Deep-Cycle, AGM and Gel Cell batteries, • Program for deep discharge recovery of flood batteries • Patented diagnostic indicate weak or defective battery • 6508A – AC Euro plug (Europe, Latin America, Middle East) • 6508X – AC China
20 Amp / 25 Amp Peak Output Bench Charger / Power Supply for Standard Automotive, Deep‐Cycle, AGM and Gel Cell batteries
20 Amp / 25 Amp Peak Output Bench Charger / Power Supply for Standard Automotive, Deep‐Cycle, AGM and Gel Cell batteries
Professional Heavy Duty Industrial Jump Starter with 7′ DC Leads Longest Portable Power Leads in the Industry • Heavy duty high impact-resistant case with rubber base • Replaceable cables/field serviceable design • Excellent for job sites, professionals, heavy duty field use • EXCLUSIVE Heavy-Duty 22Ah Sealed AGM Battery • Instantly jump-starts WITHOUT another vehicle •
Heavy Duty 12/24 Volt ‐ 720 CCA Portable Power & Jump Starter Designed for the Professional Market
Not Your Daddy’s KwikStart®
Model KS400
Professional Heavy Duty
Industrial Jump Starter
The LAST Jump Starter You May EVER Need!
US‐Designed, US‐Patented
10 Clamp Set Circuit Breaker Bus Bar • Bus Bar set for parallel charging up to 10 batteries • Use one or combine additional bars for added capacity • Insulated fiberglass backboard with 10 pairs DC charging 300 Amp insulated safety clamps with 72″ long 10 GA cable • Circuit Breaker with status LED protects
10 Clamp Set “SMART” Bus Bar • Bus Bar set for parallel charging up to 10 batteries • Use one or combine additional bars for added capacity • Insulated fiberglass backboard with 10 pairs DC charging 300 Amp insulated safety clamps with 72″ long 10 GA • Microprocessor controller protects and monitors each circuit •
Intellamatic® 12/24 Volt 70/35 Amp Charger 270 Amp Crank Assist at 12V 70 Amp Power Supply Mode Quick disconnect DC leads change from standard clamps to 13′ cable with NATO plug using Anderson Connector
Intellamatic® 12 Volt Automatic Parallel Battery Charger • Charges 1-20 12 Volt batteries in parallel in less than 24 hours • Automatic with 3 settings: Flooded, AGM, Manual • Two output setting 60A and 30A • Three LED indicators showing charging status • Analog voltage and current meters • Made in USA of US and
Powerful Performance On-board starter battery gives more cranking power than any fast charger – up to 1100 Amps cranking power Will accommodate a user supplied Group 31 battery Assists both customers and employees where there is no electrical power Recharges battery up to 20X faster than hand-carried units Solid state circuitry monitors battery condition and maintains
Hand-Held Tester with Thermal Printer and USB Port • Tests 12V Flooded, AGM, Gel Cell, Enhanced Flooded (Start/Stop Batteries) • 10 Line LCD display • Performs ground test • Checks diode ripple • Stores last 250 test series with or without power • Carrying case, printing software and USB cables included • Built-in thermal printer
• 6/12 Volt Digital Volt Meter • Light weight accurate 6/12 Volt Digital Volt Meter • Check charging system and battery voltages • Reverse hook-up protection • Four digit display • OCV state of charge percentage for both batteries AGM and Flooded
Intellamatic® 12 Volt 60 Amp Charger 270 Amp Crank Assist 70 Amp Power Supply Mode 10/15 Amp Memory Saver Port 12′ ODBII Cable and CC6212 Positive Cable Covers
High visibility coiled cord stretches to 8 feet OBDII Connector with cigarette lighter input and in-line fuse
Intellamatic® 12/24 Volt 70/35 Amp Charger 270 Amp Crank Assist at 12V 70 Amp Power Supply Mode
Intellamatic® 12 Volt Charger/Analyzer/ Power Supply 45 Amp power supply mode for extended service procedures or re-flashes 130 Amp Crank Assist
220V International Fleet & Commercial Fast Battery Charger • Charges all standard and maintenance-free 6/12/24 volt batteries • High-speed 230 VAC charger • 500 Amp cranking assist • Rated up to 80 Amp continuous 12 volt charge output • 400 Amp insulated clamps • “Safe in Any Weather” Operation • Available with Euro (6512) or UK
Intellamatic® 12 Volt 4 Channel x 20 Amp Multi Battery Charger • Four independent, fully automatic charging channels that control voltage and current up to 20 Amps per circuit • Four sets of LED indicators showing charging status by battery • Four sets of detachable 6′ leads with 300 Amp heavy duty clamps • Patented
Side Terminal Adapter • Fits Associated and most other insulated clamps • Allows for easier connections in hard to reach spots • PATENTED • Made in USA of US and Global Components
Heavy Duty Plug-In Polarized Stainless Steel Socket Panel, Flush Mount 5 ft. 1 AWG Tangle-Free Dual Extruded Cable
Aircraft Booster Cable (Piper) • Features a special Piper single-pin plug on one end and clamps on the other end • Polarity light warns if clamps are connected incorrectly • 4 AWG booster cable length – 15 feet • Made in USA of US and Global Components
Aircraft Jumper Cable • This jumper cable features a standard 3-pin Polycarbonate female plug (ANN2551) • Polarity light warns if clamps are connected incorrectly • Tangle-free Dual Extruded • Model 6141 Tangle-free Dual Extruded 4 AWG Cable length – 15 feet • Model 6141-25 Tangle-free Dual Extruded 4 AWG Cable length – 25 feet •
Plug-In Polarized Stainless Steel Socket box for 6139, 5 ft. 4 AWG Tangle-Free Dual Extruded Cable
Plug-In Polarized Stainless Steel Socket Panel, Flush Mount 5 ft. 4 AWG Tangle-Free Dual Extruded Cable
Battery Charging Rack with 10 Clamp Sets • Stores up to 15 Batteries on heavy-gauge steel rack with Acid Resistant Shelves • 10 pairs DC charging 300 Amp insulated safety clamps with 72″ long 10 GA • 48″L X 48″H X 12″W Stand-alone unit • Made in USA of US and Global Components
Parallel Battery Charger • 30 Amps maximum continuous output • Powerful Performance • Charges 1-10, 12 volt batteries, in parallel, in less than 24 hours • Designed for 220VAC 50/60Hz electrical environments • Includes a patented multi-diode rectifier with a deep reserve capacity • Additional accessories available • Made in USA of US and Global
10 Clamp Set Bus Bar • Bus Bar set for parallel charging up to 10 batteries • Use one or combine additional bars for added capacity • Insulated fiberglass backboard with 10 pairs DC charging 300 Amp insulated safety clamps with 72″ long 10 GA cable • Can be mounted on a wall or bench
High Speed Thermal Printer • RS232C serial interface via a 6-pole RJ12 socket • Tested to comply with FCC Standards • Designed for use with Associated Model 6044 and similar devices • Four AA Batteries included • Imported
220V Heavy Duty International Commercial Battery Charger • Charges all standard & maintenance-free 6/12/24 batteries • Our highest output 220 VAC charger (Euro plug) • 325 Amp cranking assist • Cautions against incorrect polarity with patented “Stop/Go-light” technology • 500 Amp insulated clamps • CE Approved – Tested for safety by TUV Rhineland of North
Heavy-Duty Roll Around Cart • Powder Coated Steel with Universal Mounting Top Plate Adjustable for Easy Visibility • 2 Storage Trays – top tray for battery tools, bottom tray accommodates bench-top battery charger • Heavy Duty wheels • Made in USA of US and Global Components
220V Heavy Duty International Commercial Fast Battery Charger • Charges all standard & maintenance-free 6/12/24 batteries • 220 VAC charger (Euro plug) • 300 Amp cranking assist • 400 Amp insulated clamps • CE Approved – Tested for safety by TUV Rhineland of North America • CE Approved – Tested for EMC by DLS Electronic
12V 0-500 Amp Carbon Pile Battery Load Tester and 12/24V Electrical Systems Tester • Test batteries up to 1000 CCA • Interprets data from the charging/starting system on easy-to-read LCD displays • Shows positive and negative amps for easy diagnosis of current leakage problems • 0-500 Amp variable carbon pile load tester • Unique curved
0-600 Amp Variable Carbon Pile Load Tester • Test batteries up to 1200 CCA • Fine threaded shaft for fine adjustment • Temperature compensation chart • Easy to read digital voltmeter & ammeter combine with the versatility of a carbon pile load • Spring loaded to shut-off automatically • Unique curved discs to prevent hot
6/12/24 Volt Heavy-Duty Variable Carbon Pile Load Tester • Same features as Model 6036B • PLUS the added value of 24 Volt battery testing capacity • Made in USA of US and Global Components
6/12 Volt Heavy-Duty Variable Carbon Pile Load Tester • High-volume testing and fleet use • Tests 6/12 Volt batteries • 1000 Amp load; tests batteries up to 2000 cold cranking amps • Cools with high RPM fan for continuous battery testing • High resolution carbon pile assembly for smoother operation and longer life • Optional
Carbon Pile Load Tester 500 AMP • Carbon pile tester handles all 6/12 volt batteries • Two large 4.5″ analog meters display amps and volts • DC test leads are 2.5′ 4 AWG cable • Unit comes with manual adjust knob • Buzzer sounds after load is engaged for 15 seconds • Imported
Heavy-Duty Tangle-Free Plug-In Booster Cables • Extra heavy duty plug-in starting system ideal for volume car starting in extremely cold climates • 800 Amp solid copper jaw • For flush mount version, combine with Model 610321 • Polarity Indication • Heavy duty Stainless Steel Box • 25’ of tangle-free dual-extruded Heavy Duty 1 AWG cables
Stainless steel receptacle mounts onto a truck bumper and connects directly to a battery • Reaches stalled vehicles from front, back or side • For flush mount version, combine with Model 6125 • Polarized polycarbonate plug won’t break in coldest weather • Patented “Stop/Go safety light” • Heavy duty stainless steel box • 25’ of
500 Amp fully insulated Clamps with Side Terminal Adapters • 30’ of tangle-free dual-extruded 4 AWG cables • Made in USA of US and Global Components
Heavy-duty 500 Amp fully insulated Clamps with Side Terminal Adapters • 25’ of tangle-free dual-extruded 4 AWG cables • Made in USA of US and Global Components
Professional quality, heavy-duty clamps for all booster cables • Replace or upgrade battery chargers and booster cables • With replaceable copper jaws • Made in USA of US and Global Components
Professional quality, heavy-duty clamps for all booster cables • Replace or upgrade battery chargers and booster cables • With replaceable copper jaws • Made in USA of US and Global Components
Professional quality, heavy-duty clamps for all booster cables • Replace or upgrade battery chargers and booster cables • With replaceable copper jaws • Made in USA of US and Global Components
20’, 4 AWG, 500 Amp Clamp Heavy Duty Booster Cable with Flexi-Spring Strain Relief and Side Terminal Adapters
15’, 5 AWG, 500 Amp Clamp Heavy Duty Booster Cable with Flexi-Spring Strain Relief and Side Terminal Adapters
12’, 5 AWG, 500 Amp Clamp Heavy Duty Booster Cable with Flexi-Spring Strain Relief and Side Terminal Adapters • Equipped with a red safety light (Stop/Go) which warns operator if polarity is reversed
12’, 5 AWG, 500 Amp Clamp Heavy Duty Booster Cable with Flexi-Spring Strain Relief and Side Terminal Adapters
Alternator/Battery Load Tester • Tests for defective alternator diodes including GM trio test • Performs complete battery test • 125 Amp load checks state of charge • Searches for excess starter current and alternator/regulator output voltage • Includes test lead set (610271) • Made in USA of US and Global Components
Hand-Held/Digital Load Tester • Full 125 Amp load Tests 12 Volt and 24 Volt batteries (DUAL LOAD) alternators and starters on all types of vehicles • PATENTED • Made in USA of US and Global Components
Hand-Held/Digital Load Tester • Full 125 Amp load tests 12 Volt batteries, alternators and starters on all type of vehicles • PATENTED • Made in USA of US and Global Components
Durable Hand-Held Battery Tester • Test 6 & 12 Volt batteries, alternators and starters • 125 Amp fixed load • Made in USA of US and Global Components
Hand-Held 12 Volt Combo Digital Load Tester • 60 Amp load to test smaller batteries: CCA and Amp hours • 125 Amp load to fully test larger batteries: CCA and Amp hours • 125 Amp clamps offer greater flexibility when attaching the hard to reach applications • Made in USA of US and Global Components
Hand-Held Battery Load Tester, Alternator and Starter Tester • 135 Amp Fix Load Cables • Recessed meter helps protect this hand-held tester from damage and ensures more accurate and reliable outputs • Features easy to use clamps with 300 Amp jaws • Lightweight and easy to use • Imported
Hand-Held Alternator/Battery Load Tester • Full 125 Amp load tests 12 Volt and 24 Volt Batteries, alternators and starters on all types of vehicles • PATENTED • Made in USA of US and Global Components
Performance Features • Professional series battery charging with up to 158 volt continuous output • Charges 2 – 60 cells from 0 to 6 amps • State-of-the-art, anti-spark safety delay • Voltage is shut-off when current is interrupted, eliminating sparking and provides additional protection when charging 10 batteries where the voltage approaches 150 volts DC
Performance Features • Highest industry rated voltage output (106 volts) for this category of series battery charger • Charges up to 36 cells at the same time • Designed for continuous duty, heavy duty operation • Charges new batteries and rejuvenates deeply sulfated batteries • Fully charges 6 maintenance-free, AGM or GEL batteries at one
Powerful Performance – Parallel Battery Charger • 110 Amp Output at 15.5 Volts • Charges 1-36, 12 volt batteries in less than 24 hours in parallel • Designed for 190 – 262VAC 50/60Hz electrical environments • Includes a pigtail rectifier with a deep reserve capacity • Digital Control shows testing efficiency results • Additional accessories
Parallel Battery Charger • 30 Amp Output at 14.9 Volts • Charges 1 to 10, 12 Volt batteries in less than 24 hours in parallel • 16 charge rates offer precise charging • Analog Meter shows testing efficiency results • SPANISH INSTRUCTION version available Model 6065S • Made in USA of US and Global Components
Model 6127 Kwik Start (North America) 110 Volt Roll Around Starting Unit Model 6127EX Kwik Start (International) 220 VAC Roll Around Starting Unit • On-board starter battery gives more cranking power than any fast charger — up to 1100 amps cranking power • Assists both customers and employees where there is no electrical power •
